Isenberg 196.4301MB 3/4x22 Thermostatic Valve with 3-Way Diverter and Trim Matte Black

Description

The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly. In case, the tile is thicker or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve. CUT OUT DIMENSIONS – The cut out in wall should be 6.49” x 4.44” Inches which is properly covered by the trim plate. The bottom handle sets the temperature. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. HANDLE OPERATION – The bottom handle is used to control the temperature of water flowing through the outlet. Product Documents SPECIFICATION SHEET PARTS DIAGRAM Installation Installation Documents. SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs. This product meets CAL-Green compliance criteria. VALVE INSTALLATION – As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec]. The diverter handle on the top diverts the flow from each of the three outputs of the valve. The trim plate is used to cover the wall. TRIMS – The trims comprise of a well-finished cover plate and handle knobs. Covering this ring is the handle knob which has a push-button on the side.

Key Features

• ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value.
• The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.
• TRIMS – The trims comprise of a well-finished cover plate and handle knobs.
• The top handle controls water diversion between the 3 water output ports.
• Isenberg 3/4′′ Thermostatic Valve with 3-Way Diverter and Trim 196.4301 Product Description SPECIFICATIONS: Solid Brass Valve & Trim Includes Thermostatic Valve Diverts water between 3 outlets.
• VALVE INSTALLATION – As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec].